Buying ceramic tiles to decorate a house has always been a difficult problem. I don’t know what style of ceramic tiles to choose, what specifications of ceramic tiles to choose, and what color of ceramic tiles to choose. So when it comes to What is the difference between full tiles and half tiles, I don’t even know. I am confused. Is there such a distinction in style? So let’s learn about this for today’s topic!
1. The difference between full tiles and half tiles
1. Different water absorption rates
Relatively speaking, the water absorption rate of half ceramic tiles is higher, greater than 0.5%, while the water absorption rate of full ceramic tiles is relatively low, less than 0.5%. In other words, the water absorption rate of half tiles is greater than that of full tiles. It is worth mentioning that full ceramic tiles are also called vitrified tiles.
It should be noted that due to the low water absorption of full ceramic tiles, they are not suitable for paving after soaking in water; while the water absorption of half ceramic tiles is high, so they need to be soaked in water before paving. Paving can then be carried out. In addition, full tiles and half tiles have different cut surfaces and different prices.
2. Different characteristics
In addition to water absorption, there is another difference between full tiles and half tiles, and that is performance characteristics. Taken together, the performance of full tiles is better than that of half tiles; in terms of hardness, damage resistance, anti-fouling performance, water absorption, flatness and other indicators, full tiles are better than half tiles. Because full ceramic tiles have higher hardness, are not easy to break, are stain-resistant, have better water absorption, and have better flatness; while half ceramic tiles are just the opposite. They are not only low in hardness and easy to break, but also easy to penetrate and have poor gloss.
2. How to distinguish between full tiles and half tiles
1. Test water absorption
Because the water absorption rates of full tiles and half tiles are different, we can use this to distinguish the two. The method is very simple: put the two tiles with their backs facing up, then pour water on the two tiles respectively, and observe the absorption of the two; generally speaking, the half tiles will absorb the water immediately, while full ceramic tiles will basically not absorb it.
2. Difference in name
When you hear names such as polished tiles, vitrified tiles, cloud shadow stone, amber jade, etc., it means full tiles, otherwise it means half tiles. Here, we need to remind everyone that full ceramic tiles are generally used for floor decoration, while half ceramic tiles are used for paving on walls. In fact, it is easy to think of the reason for this operation. The tiles attached to the wall need to be strong, so the water absorption rate is high, so half tiles are used for wall tiles; while the water absorption rate of full tiles is low and it is not easy to absorb stains and other stolen goods. Therefore, it is more suitable to be used on the ground and is easy to clean.
3. Listening and identification
Hold the tile hand in the air, and then tap the middle part of the tile with the other hand. At this time, we need to pay attention to the sound made by the tile; if the sound is very thick and has a long echo, then It is a fully vitrified tile, that is, a full tile; and if the sound is muddy, short, and the echo is very small, then there is no doubt that it is a half tile.
After reading the above content, you will have a certain understanding of the content of the article about The difference between full tiles and half tiles that the editor shared with you today! Well, that’s it for today’s content sharing. I hope it can be helpful to you! Slip, slip, slip!
